Aoyou Machinery

The centrifugal oil filter is the leading research and development of our factory. It is an advanced oil filter equipment that meets the standard and is carefully designed by Aoyou Mechanical Equipment Co., Ltd. - Aoyou Mechanical Science and Technology Personnel. The centrifugal oil filter uses the powerful centrifugal force generated by the high-speed rotating drum to separate the residue with different mass and weight ratio from the oil solid and liquid, so as to achieve the purpose of oil filtration. It can be directly ignited for experiment, without foaming and overflowing.

The filtering equipment we have used in the past, such as plate-and-frame filter, vacuum filter and pneumatic filter, is called media filter (media refers to filter cloth and filter screen). Due to the different mesh size of the media filter cloth, large residue is filtered out during the filtering process, and small particles flow into the oil through the mesh. This is the effect of these filtering equipment in the past is to solve the problem of oil quality relatively. In terms of operation, After the oil colloid in the crude oil has blocked the mesh, the filter cloth should be removed and replaced repeatedly, and the filter cloth and later consumables should be cleaned.

Aoyou Machinery Equipment Co., Ltd. - the supplier of centrifugal oil filter produced by Aoyou Machinery, the price of centrifugal oil filter, and the working principle of centrifugal oil filter

The centrifugal oil filter is the leading research and development of our factory. It is an advanced oil filter equipment that meets the standard and is carefully designed by our scientific and technological personnel.

This machine uses the powerful centrifugal force generated by the high-speed rotating drum to separate the residue with different mass and weight ratio from the oil solid and liquid, so as to achieve the purpose of oil filtration. It can be directly ignited for experiment, without foaming and overflowing.

The filtering equipment we have used in the past, such as plate-and-frame filter, vacuum filter and pneumatic filter, is called media filter (media refers to filter cloth and filter screen). Due to the different mesh size of the media filter cloth, large residue is filtered out during the filtering process, and small particles flow into the oil through the mesh. This is the effect of these filtering equipment in the past is to solve the problem of oil quality relatively. In terms of operation, After the oil colloid in the crude oil has blocked the mesh, the filter cloth should be removed and replaced repeatedly, and the filter cloth and later consumables should be cleaned.

The centrifugal oil filter is an advanced equipment to solve the problem of oil quality.

Centrifugal oil filter, price of centrifugal oil filter, operation of centrifugal oil filter

1. Add the hot crude oil of machine press into 1-1.5% hot salt water and stir it fully. The purpose is to ① dephosphorize, because phosphorus will cause osteoporosis and other diseases to human body, so one of the national oil standards is the limit of phosphorus index content, H2O The combination reaction of NaCl (salt water) and phosphorus P forms heavy salt Na2P5O (sodium phosphate) and H2 ↑ (hydrogen) ② adding salt water makes the water absorbed by fine particles heavier;

2. Turn on the power supply of the centrifugal oil filter, and then add the salinized crude oil. The crude oil flows from the flow pipe of the oil hopper through the hollow shaft at the upper end of the centrifuge to the nylon small disk at the bottom of the drum. The small disk quickly distributes the crude oil evenly to the inner wall of the drum. At this time, the strong centrifugal force generated by the high-speed rotating drum will separate the solid and liquid with different weights. Turn off the power supply 2-3 minutes after the crude oil is added, After the drum stops running, the clean oil will flow out automatically to achieve the purpose of fine filtration. It only takes 5-6 minutes before and after filtration, and the filtration amount is 250-350 kilograms of oil per hour.

Aoyou Machinery Equipment Co., Ltd. - the supplier of centrifugal oil filter produced by Aoyou Machinery, the price of centrifugal oil filter, and the slag removal of centrifugal oil filter

1. The slag removal in the drum is 800-1200 kg for one time. Large diameter: large diameter bearing is used, and the upper cover is not required to be opened. The machine can be stopped at any time for slag removal, which is convenient and fast. The slag around the inner wall of the drum shall be cleaned every time, otherwise the drum will be biased due to incomplete slag cleaning, resulting in machine vibration during re-filtration.

2. The outer bucket is cleaned every 7-10 days. After opening the upper cover of the outer bucket and the upper cover of the inner bucket respectively, remove the small screw on the small disk in the middle of the bottom of the inner bucket. Then two people lift the inner bucket vertically and forcefully to clean the bottom of the outer bucket. After cleaning, reinstall the inner bucket, put the small disk and O-ring at the bottom of the inner bucket in place (to prevent oil leakage and sealing), and tighten the small screw (not too tight to prevent twisting), Close the upper cover of the inner barrel and the upper cover of the outer barrel, and then start the machine again. It is strictly forbidden to start the machine without installing it, which will cause equipment damage, and the manufacturer will not guarantee it.

3. For the use of centrifugal oil filter, the foundation concrete shall be prefabricated, and the foundation bolts shall be embedded according to the distance of three foundation bolt holes. The prefabricated concrete surface shall be horizontal, and the rubber shockproof pad shall be added between the prefabricated surface and the equipment foundation.

Aoyou Machinery Equipment Co., Ltd. - the supplier of centrifugal oil filter produced by Aoyou Machinery, the price of centrifugal oil filter, and warm tips of centrifugal oil filter

The centrifugal oil filter was put into research and development at the beginning of 2008. After it was put on the market in April 2009, it was welcomed by users. In addition, we constantly improved the product quality, improved the product technical performance, and constantly improved the product technology content, so that our products have maintained a strong sales momentum until the end of 2010. Recently, some manufacturers have imitated our products for market sales. They are worried about their malicious competition, ignoring the safety of users, and greatly reducing the material. The performance is as follows: the bottom plate of the outer barrel is R450-14mm thick, they are reduced to Q230-10mm thick, the wall thickness of the outer barrel is R450-4mm plate, they are reduced to Q230-1.8mm thick, the inner barrel wall is R450-3.5mm plate, they are reduced to Q230-2mm plate, and the motor and bearing adopt non-national standard quality to reduce costs, There is no dynamic and static balance calibration equipment for poor production, and customers are attracted at a low price. In this regard, Aoyou Machinery Equipment Co., Ltd. - the supplier Aoyou Machinery solemnly reminds you:

1. The selection of products should take quality and technical content as the investment criteria. The intuitive aspect of market competition is to bring benefits to you, and on the other hand, it determines the user's personal choice. Aoyou Mechanical Equipment Co., Ltd. - the supplier Aoyou Mechanical Oil Filter will not turn customers away at high prices;

2. The separation effect of centrifugal oil filter depends on the separation factor. The separation factor is directly related to the drum diameter and the drum speed. That is, the higher the drum speed of the same diameter is, the greater the centrifugal force is, the better the separation effect is. The calculation method of centrifugal force is, assuming that 1 gram of object is Φ When the 430mm drum rotates at a high speed of 1440 rpm, the centrifugal force of this 1g object: 1g × 215mm (radius) × 1440 rpm ÷ 1000 g=3kgN (centrifugal force). What we want to explain to you is that the greater the centrifugal force, the better the separation effect. At the same time, the long-term effect of centrifugal force on the drum will cause material fatigue. Of course, the smaller the material, the shorter the fatigue period, and the drum tear phenomenon will occur. This is about the service factor. The service factor is first of all the material. In the material situation of our materials that we solemnly announced to all users, R450 refers to the high chromium material of thermal pressure vessels, while Q230 is the common material in the market. The impact strength of the two different materials of the same thickness is 6-10 times of the latter, and the tensile strength of the former is 3-5 times of the latter, specifically; The impact strength of R450-4mm outer barrel plate is 16000kg/cm2, while the impact strength of Q230-1.8mm outer barrel plate is 2000 kg/cm2, and the tearing force produced by the torn drum is 250 kg/cm2. This is the proof of the national material list for the material items. The R450 thermal pressure vessel high chromium plate is the designated product specially used for the material of high pressure vessels by the state. The tensile resistance is quite strong. The centrifugal force of all high-speed rotating drums is so large that the material with relatively high tensile strength must be selected. At the same time, the material selection of the outer barrel plate also serves as a precaution. We purchase the equipment to improve economic benefits, But the quality of production and equipment decides everything.

Here, I also remind my customer friends that even if you have the past, such as plate-and-frame filter, vacuum filter and pneumatic filter, you still need to invest in advanced centrifugal oil filter, for two reasons: first, improve the quality of service to customers to ensure your economic benefits; 2： The purchase of advanced centrifugal filtration equipment is just a matter of increasing your investment at the moment, but you have left the residue in the oil that the user has not completely filtered through centrifugal filtration for a long time. Clean the residue once every 1000 kg, twice a day, and if you clean out about 25 kg of residue each time, you will get 50 kg of residue a day. This accumulates over time. In fact, the long-term use is the user who pays for the equipment for you.