Aoyou Machinery

The peanut sheller is designed according to the market demand and the characteristics of peanut fruit. The sheller is made of good wood and the shell is made of thickened special products. The machine is beautiful, compact, practical and easy to operate. It is a modern mechanical equipment that can replace manual selection, and is also a helper for farmers and seed customers.

There are many brands of peanut shellers in the current market, and the functional efficiency varies greatly. Aoyou Machinery Equipment Co., Ltd. - The peanut shelling machine produced by Aoyou Machinery, the supplier, is the second-generation peanut shelling machine of our factory, which integrates peanut shelling, kernel and shell separation and other functions. After shelling, the peanut has high shelling rate, low kernel crushing rate and clean kernel and shell separation. The peanut seed sheller has the characteristics of simple operation, light weight, low power consumption, low noise, dust-free, no need for fixed support, and can be moved and used at will. This machine is an ideal shelling equipment for seed peanuts, commercial peanuts and oil-pressed peanuts, and its various performances meet the national standards.

---

Introduction to peanut sheller, peanut sheller and peanut seed sheller

Aoyou Machinery Equipment Co., Ltd. - The peanut sheller produced by Aoyou Machinery, a supplier, is designed according to the market demand and the characteristics of peanut fruit. The shelling roller is made of good wood and the shell is made of thickened special products. The machine is beautiful, compact, practical and easy to operate. It is a modern mechanical equipment that can replace manual selection, and is also a helper for farmers and seed customers.

There are many brands of peanut seed shellers in the current market, and their functional efficiency varies greatly. This machine is the second generation peanut shelling machine of our factory, which integrates peanut shelling, kernel and shell separation and other functions. After shelling, the peanut has high shelling rate, low kernel crushing rate and clean kernel and shell separation. The peanut seed sheller has the characteristics of simple operation, light weight, low power consumption, low noise, dust-free, no need for fixed support, and can be moved and used at will. Peanut sheller is an ideal shelling equipment for seed peanuts, commercial peanuts and oil-pressed peanuts, and its various performances meet the national standards.

---

Features of peanut sheller, peanut sheller and peanut seed sheller produced by Aoyou Machinery Co., Ltd

1. The peeling roller adopts the principle of rotary dry peeling with wooden roller and grading and seed selection with electric screen.

2. The shelling roller adopts good wood, the seed damage rate is low, and the shell adopts iron plate powder spraying technology, which is beautiful, generous and durable.

3. The motor voltage is 220V and the power is 2.2KW. The new copper wire motor has a longer service life.

4. The specially designed hair dryer has moderate wind power and uniform wind power distribution, which can separate the seeds from the shell and optimize the seed recovery rate.

5. The sheller is equipped with a universal wheel, which adopts a unique side-mounted design and is easy to move.

6. Compact and convenient. The shelling rate can reach 800-900 jin (fig) per hour, and the peeling rate is more than 98%.

7: Each machine is equipped with three grates, which can be used for peeling peanuts of different sizes and specifications.

---

Usage and precautions of peanut sheller, peanut sheller and peanut seed sheller

1. Please put the sheller in a spacious and flat place for operation.

2. Before use, check whether the fasteners are tightened, whether the rotating parts are flexible, and whether there is lubricating oil in each bearing. The sheller shall be placed on a stable ground.

3. After the motor is started, the rotation direction of the rotor shall be consistent with the direction indicated on the machine. After idling for a few minutes, observe if there is any abnormal noise, and then feed the peanuts evenly.

4. The peanuts should be fed evenly and appropriately, and should not contain iron chips, stones and other sundries, so as to avoid breaking peanuts and causing mechanical failure. When the peanuts cover the sieve surface, the rice outlet switch can be turned on.

5. Select appropriate screen according to the size of peanuts.

6. The width of the feed inlet is generally adjusted to about 3.5 cm (it can be adjusted appropriately according to the size of the peanut varieties), and the peanut shelling needs to maintain uniform feeding.

7. When assembling the vibrating screen, the pull rod nut at the bottom of the vibrating screen should be tightened, and the length of the pull rod tail is generally 2 cm.

8. If the peanut with shell is too dry, the damage rate will increase correspondingly when shelling. At this time, the peanut shell can be evenly soaked with water and then placed for several hours before shelling, which can achieve the ideal effect.

9. Aoyou Machinery&Equipment Co., Ltd. - the supplier Aoyou Machinery reminds you that people should not stand on the side of belt drive during operation to avoid injury. Do not put your hands into the motor, hair dryer, the inside of the shield and the depth of the feed inlet and other mechanical moving parts to avoid injury.

10. When using the machine for a period of time and preparing to store it, clean the dust, dirt on its surface and residual grains inside, and remove the belt for storage. Clean all parts of bearings with diesel oil, dry them and apply butter. The machine shall be covered and placed in the dry warehouse to avoid the sun and rain.

11. Ensure that there is sufficient lubricating oil in the transmission part and bearing, and clean and replace it regularly.