Aoyou Machinery

Rapeseed screening machine is often used for the selection, grading and impurity removal of rapeseed, sesame, wheat, rice, corn, soybean, cotton seeds and various oilseeds. It is suitable for large grain farmers and feed processing plants.

Aoyou Machinery and Equipment Co., Ltd. - The rapeseed screening machine produced by the supplier Aoyou Machinery screened 3 tons of soybeans and corn per hour, 2 tons of wheat and rice per hour, and 500-1000 kg of cotton seeds and oil seeds per hour. The screening rate of impurities such as dust, debris, bad grain and small stones in grain and oil can reach more than 95%!

Working principle of rapeseed screening machine, rapeseed screening machine and rapeseed vibrating screen

First place the machine in a horizontal position, connect the power supply, start the work switch, and ensure that the motor runs clockwise to show that the machine enters the correct working state. Then pour the screened material into the feed hopper, and adjust the stopper plate at the bottom of the hopper according to the particle size of the material to make the material evenly enter the upper screen; At the same time, the drum fan at the upper part of the screen can correctly supply air to the discharge end of the screen; The air inlet at the lower end of the fan can also be directly connected to the cloth bag to receive the light and miscellaneous waste in the grain.

The lower part of the rapeseed screening machine has four bearings which are respectively fixed in the channel steel on the frame for linear reciprocating motion; The upper coarse screen of the screen is used to clean the large particle impurities in the material, while the lower fine screen is used to clean the small particle impurities in the material.

One side of the cleaner is coordinated with the crankshaft or eccentric wheel driven by the motor through the movable connecting rod to complete the whole process of cleaning and impurity removal.

Rapeseed screening machine, rapeseed screening machine, rapeseed vibrating screen structure

The rapeseed screening machine produced by Aoyou Machinery Co., Ltd., the supplier of Aoyou Machinery, is mainly composed of screen box, screen frame, screen screen, vibration motor, vibration damping spring, bracket, sealing cover, etc.

1. Screen box: It is welded from several steel plates with different thickness, and has certain strength and rigidity. It is one of the main components of the screen machine.

2. Screen frame: made of pine or other wood with small deformation, mainly used to keep the screen flat and achieve normal screening.

3. Screen: There are several kinds of screens, such as low-carbon steel, brass, bronze, stainless steel wire, etc.

4. Vibration motor: generally two full-copper core three-phase vibration motors (see the vibration motor operation manual for use and maintenance methods).

5. Motor pedestal: install the vibration motor, and the connecting screws must be tightened before use, especially three days before the trial use of the new screen machine, to avoid loosening and causing accidents.

6. Damping spring: prevents vibration from being transmitted to the ground, and supports the full weight of the screen box. During installation, the spring must be vertical to the ground.

7. Support: It is composed of four columns and four channel steels, supporting the screen box. During installation, the columns must be vertical to the ground, and the channel steels under the columns should be parallel to each other.